Manual Mac Authorization

Posted on
  1. Manual Mac Authorization Form
  2. Manual Mac Authorization Download

This chapter describes how to configure MAC-based authentication on the Arubacontrollerusing the WebUI.

Use MAC-based authentication to authenticate devices based on their physical media access control (MAC) address. While not the most secure and scalable method, MAC-based authentication implicitly provides an addition layer of security authentication devices. MAC-based authentication is often used to authenticate and allow network access through certain devices while denying access to the rest. For example, if clients are allowed access to the network via station A, then one method of authenticating station A is MAC-based. Clients may be required to authenticate themselves using other methods depending on the network privileges required.

MAC-based authentication can also be used to authenticate Wi-Fi phones as an additional layer of security to prevent other devices from accessing the voice network using what is normally an insecure SSID.

  • Return to the Duo Admin Panel and view the Manual Enrollment management integration for your Mac OS X device. Scroll down to the Activate step and click the toggle to enable trusted device reporting for Mac OS X devices.
  • Manual Mac Authorization 9/21/2019 MAC (HHH) to CWF for payment authorization but HCPCS code G0337 (Hospice Pre- Election Evaluation and Counseling Services) has already been approved for a hospice claim for the same beneficiary, for the same date of service, by the same physician, the.

Find the manual for your Mac Refer to the manual for your Mac when you need information that’s specific to your model, such as supported connections and expansion information. MAC (Message Authentication Code) algorithm is a symmetric key cryptographic technique to provide message authentication. For establishing MAC process, the sender and receiver share a symmetric key K. Essentially, a MAC is an encrypted checksum generated on the underlying message that is sent along.

This chapter describes the following topics:

Configuring MAC-Based Authentication

Before configuring MAC-based authentication, you must configure:

  • The user role that will be assigned as the default role for the MAC-based authenticated clients. (See Chapter 10, “Roles and Policies” for information on firewall policies to configure roles).

You configure the default user role for MAC-based authentication in the AAA profile. If derivation rules exist or if the client configuration in the internal database has a role assignment, these values take precedence over the default user role.

  • Authentication server group that thecontrolleruses to validate the clients. The internal database can be used to configure the clients for MAC-based authentication. See “Configuring Clients” for information on configuring the clients on the local database. For information on configuring authentication servers and server groups, see Chapter 8, “Authentication Servers”

Configuring the MAC Authentication Profile

Table 68 describes the parameters you can configure for MAC-based authentication.

Table 68 MAC Authentication Profile Configuration Parameters (Continued)

Parameter

Description

Delimiter

Delimiter used in the MAC string:

lcolon specifies the format xx:xx:xx:xx:xx:xx

ldash specifies the format xx-xx-xx-xx-xx-xx

lnone specifies the format xxxxxxxxxxxx

Default: none

Case

The case (upper or lower) used in the MAC string.

Default: lower

Max Authentication failures

Number of times a station can fail to authenticate before it is blacklisted. A value of 0 disables blacklisting.

Default: 0

Using the WebUI to configure a MAC authentication profile

1.Navigate to the Configuration >Security >Authentication > L2 Authentication page.

2.Select MAC Authentication Profile.

3.Enter a profile name and click Add.

4.Select the profile name to display configurable parameters.

5.Configure the parameters, as described in Table 68.

Manual Mac Authorization

6.Click Apply.

Using the CLI to configure a MAC authentication profile Ielts 3châu thông phan.

aaa authentication mac <profile>

Manual Mac Authorization Form

case {lower upper}

delimiter {colon dash none}

Mac

max-authentication-failures <number>

Configuring Clients

You can create entries in thecontroller’s internal database that can be used to authenticate client MAC addresses. The internal database contains a list of clients along with the password and default role for each client. To configure entries in the internal database for MAC authentication, you enter the MAC address for both the user name and password for each client.

You must enter the MAC address using the delimiter format configured in the MAC authentication profile. The default delimiter is none, which means that MAC addresses should be in the format xxxxxxxxxxxx. If you specify colons for the delimiter, you can enter MAC addresses in the format xx:xx:xx:xx:xx:xx.

Using the WebUI to configure clients in the internal database

1.Navigate to the Configuration >Security >Authentication >Servers > page.

2.Select Internal DB.

3.Click Add User in the Users section. The user configuration page displays.

4.For User Name and Password, enter the MAC address for the client. Use the format specified by the Delimiter parameter in the MAC Authentication profile. For example, if the MAC Authentication profile specifies the default delimiter (none), enter MAC addresses in the format xxxxxxxxxxxx.

5.Click Enabled to activate this entry on creation.

Manual Mac Authorization

6.Click Apply to apply the configuration.

The configuration does not take effect until you perform this step.

Using the CLI to configure clients in the internal database

Enter the following command in enable mode:

local-userdb add username <macaddr> password <macaddr>..

Chapter 16

Manual Mac Authorization Download

MAC-based Authentication